Asus H81m-k Motherboard Setup -

Open the LGA1150 socket lever and carefully align the notches on your 4th Gen Intel CPU with the socket.

Before handling the motherboard, ensure you are grounded to prevent electrostatic discharge (ESD) and ensure the power supply is unplugged. CPU Socket (LGA 1150): asus h81m-k motherboard setup

Plug your OS drive into a yellow SATA 6Gb/s port for maximum performance. 3. BIOS Configuration and OS Setup Open the LGA1150 socket lever and carefully align

: Supports Intel Core i7/i5/i3, Pentium, and Celeron processors in the : Features slots, supporting a maximum of of DDR3 1600/1333/1066 MHz non-ECC, unbuffered memory. : Includes 2 x SATA 6Gb/s (yellow) and 2 x SATA 3Gb/s (black) ports. : Requires a 24-pin EATXPWR main connector and a 4-pin ATX12V CPU power connector. 2. Installation Steps ASUS H81M-K Micro ATX Motherboard User Manual : Requires a 24-pin EATXPWR main connector and

The front panel header is a 10-1 pin block usually located at the bottom-right of the board. Connect your case cables to the pins as follows: Power Switch (PWR BTN): Top row, pins 3 and 4. (No polarity required). Reset Switch (RESET): Bottom row, pins 3 and 4. (No polarity required). Power LED (PWR_LED): Top row, pins 1 (+) and 2 (-). HDD LED (HDD_LED): Bottom row, pins 1 (+) and 2 (-). 3. Storage and Peripheral Connections SATA Ports: There are 4 ports total. Use the yellow ports (SATA 6Gb/s) for your primary SSD or HDD for the best speed. Audio (AAFP):