Fanuc 10t Parameter Manual ((top)) -

Bit 0 (PWE): 0 = Parameter write disabled (protected). 1 = Parameter write enabled. Bit 1 (PRW): 0 = Programs locked. 1 = Programs unlocked. Note: To change PWE to 1, you must be in MDI mode with emergency stop released.

Input/Output configurations, timer settings, and counter settings. Option Parameters (9000-9100s): Fanuc 10t Parameter Manual

These are the most common adjustments.

| Parameter | Function | | --- | --- | | #1100 | Spindle motor type | | #1200 | Feed rate type | | #1300 | Tool length compensation | Bit 0 (PWE): 0 = Parameter write disabled (protected)

Setting up a PC connection for program transfer requires specific communication parameters. High-quality guides from FactoryWiz and EasyDNC suggest these common values: Typical Value Device Selection 5110 Device Type (DC Codes) 5111 5112 Baud Rate (4800) 5112 Baud Rate (9600) 3. Deep Recovery: The IPL Menu 1 = Programs unlocked