Mt6755+scatter+file+verified ((top)) Here

| Symptom | Cause | Solution | |---------|-------|----------| | STATUS_SEC_IMG_TOO_LARGE | Partition size mismatch (e.g., vendor/system bigger than scatter definition). | Edit partition_size in scatter (hex) to match real image. | | S_DL_PMT_ERR_NO_SPACE (0x1313) | Overlapping partitions due to wrong addresses. | Use "Scatter File Editor" from MTK Droid Tools to recalc. | | Brick (red status only in SP Flash) | PRELOADER address wrong (e.g., offset 0x0 vs 0x8000). | Verify region: EMMC_BOOT_1 vs EMMC_USER . MT6755 uses EMMC_USER for preloader. |

: Used alongside backup tools to restore corrupted NVRAM partitions and fix lost IMEI numbers. Single Partition Flashing mt6755+scatter+file+verified

mt6755_verified_scatter.txt SHA-256: a4f3c8d9e1b... Works with: Vivo X9, Oppo F1s, Sony XA Ultra, any MT6755 device with stock 6.0/7.0. Use at your own risk. Verified does not mean safe. Verified means true. | Use "Scatter File Editor" from MTK Droid Tools to recalc

Different MT6755 phones (e.g., a Leagoo T5 vs. a BLU R1 HD) have drastically different partition tables. Using the wrong scatter file can overwrite the —the first code executed by the CPU. A corrupted preloader = a dead phone (no charging, no boot, no detection). MT6755 uses EMMC_USER for preloader

: Often replaced with TWRP for rooting and custom ROM installation.

: It directs the flasher to specific regions for the preloader , recovery , bootloader , and modem firmware .