• Home
  • General
  • Guides
  • Reviews
  • News

: Insert the USB stick into the powered-off HMI panel, then switch the device on.

Find your panel's image file (typically found in your TIA Portal installation directory) and place it in the designated folder on the USB. Power Down: Completely switch off the HMI device. Insert USB: Plug the prepared drive into the panel's USB interface. Boot and Recover: Switch the power back on. The device should boot into a special recovery menu. "START RECOVERY" button three times as prompted by the interface to confirm. basic2nd-recovery-system.zip -24 6 mb-

Basic2nd-recovery-system.zip -24 6 Mb- |verified| [2026]

: Insert the USB stick into the powered-off HMI panel, then switch the device on.

Find your panel's image file (typically found in your TIA Portal installation directory) and place it in the designated folder on the USB. Power Down: Completely switch off the HMI device. Insert USB: Plug the prepared drive into the panel's USB interface. Boot and Recover: Switch the power back on. The device should boot into a special recovery menu. "START RECOVERY" button three times as prompted by the interface to confirm.